The maintenance cycle of rubber products is usually 4 to 5 years, depending on the use environment and the degree of wear. For example, the maintenance cycle of automobile tires is generally about 4 years, while the maintenance cycle of rubber seals and pipes may be longer, usually 5 years.
Specific measures for the maintenance of rubber products
Adding antioxidants and UV absorbers: Adding antioxidants to rubber materials can effectively resist the influence of oxygen and slow down the aging rate; at the same time, UV rays are one of the main factors causing rubber aging, and adding UV absorbers can protect rubber from UV damage.
Strictly control the processing temperature: Rubber is prone to aging due to high temperature during processing, so the processing temperature needs to be controlled to reduce the aging rate.
Keep dry: A humid environment will accelerate the aging rate of rubber, so it is necessary to keep rubber products dry and avoid long-term exposure to a humid environment.
Store in a low temperature and low humidity environment: When storing rubber products, a low temperature and low humidity environment should be selected to slow down the aging rate. For example, rubber products can be stored in a relatively cool and dry place such as a garage or basement.
Differences in maintenance cycles for different types of rubber products
Car tires: It is generally recommended to replace them every 4 years, and the specific time depends on the use environment and the degree of wear.
Rubber seals and pipes: The maintenance cycle is generally 5 years, but the specific time depends on the use environment and wear.
Shock-absorbing rubber parts: Such as the shock absorbers in the chassis and engine, their maintenance cycle also depends on the use environment and wear.
